Miele G 5280 User Manual

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem Possible fault Solution
The dishwasher will
not start.
The door is not properly
closed.
Push the door firmly closed.
The dishwasher is not
plugged in.
Insert the plug.
The circuit breaker has
tripped.
–
Reset the circuit breaker
(see data plate for the
correct fuse rating).
– If the circuit breaker trips
again, contact Miele.
The dishwasher is not
turned on.
Press the K button and select
a program.
The dishwasher
stops during a
program.
The circuit breaker has
tripped.
– Reset the circuit breaker
(see data plate for the
correct fuse rating).
–
If the circuit breaker trips
again, contact Miele.
The buzzer sounds.
All the indicator
lights of the
program selection
flash when the door
is open.
The time display
shows fault FXX.
There may be a
technical fault.
Press the K button to turn the
dishwasher off.
After a few seconds:
–
Turn the dishwasher on.
–
Use the Program button to
select the desired program.
–
Close the door.
If the indicator lights flash
again, there is a technical fault.
–
Contact Miele,
In addition, the drain
pump may run even
when the door is
open.
Fault F70:
The waterproof system
reports a fault.
–
Close the water supply.
–
Contact Miele.
Frequently Asked Questions
42

Miele G 5280 Specifications

General

Brand	Miele
Model	G 5280
Category	Dishwasher
Language	English