Cleaning the drain pump and
non-return valve
If the water has not been pumped away
at the end of a programme the drain
pump or the non-return valve might be
blocked. They are, however, easy to
clean. Watch out for glass or bone
splinters which could cause injury.
^
Take the filter combination out of the
wash cabinet (see "Cleaning and
care", "Cleaning the filters in the wash
cabinet").
^
Scoop the water out of the cabinet
using a suitable container.
^
Raise the locking clamp for the
non-return valve.
Solving problems
51
To Next Page
Loading...
Need help?
General
