Installing integrated “i” Dishwashers
The “i” model dishwashers are spe-
cially designed for building under a
continuous worktop.
The front can be fitted with a base unit
front to match the kitchen furniture.
By using a decor set GDU “i” model
dishwashers can be converted into a
built-under “U”model dishwasher.
The decor set is supplied with a separ-
ate installation instruction leaflet.
To ensure stability, these dish-
washers must only be installed
under a continuous worktop which
must be securely screwed to neigh-
bouring units.
Dimensions:
1) with 870 mm machine height
2) with 820 mm machine height
Range of adjustment approx. 5 cm (82-
87 cm total height).
Extended machine feet are available at
extra cost, (special accessory). These
can be used for a machine height of 87
to 92 cm.
Installing integrated “i” Dishwashers
66
To Next Page
Loading...
Need help?
General
