^
Wipe any residual salt off the screw
threads on the socket.
^ Screw the cap on firmly.
^ Immediately after this: Run the
"Rinse" program to remove any traces
of salt from the cabinet.
Important:
If after starting the "Rinse" program,
the machine will not start for a few
minutes. This is not a fault. The
water softener is being reactivated.
Salt indicator
When the salt reservoir is empty the
"Recharging" indicator light b comes
on to remind you to fill the reservoir.
Reactivation takes place automatically
during a program. The program
sequence indicator light a, "Recharge"
lights up while this is happening.
Water softener
16
To Next Page
Loading...
Need help?
General
