Miele G 7856 User Manual

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
The machine does not start.
Possible fault Solution
–
The door is not closed properly
–
The machine is not plugged in
properly.
–
The circuit breaker has tripped.
^
Close the door securely.
^
Insert the plug.
^
Reset the circuit breaker. See the data
plate for minimum amperage.
^
If the circuit breaker trips again. Contact
Miele.
A few minutes after switching on, the "Fill/Drain" indicator light flashes
(fault code F..E appears in the display)
Possible fault Solution
– The valves are closed.
– The filters in the water inlet hose
are dirty.
– The water pressure is too low.
^ Turn the program selector to the "Stop"
position (the fault code goes out).
^ Turn the machine off using the "On/Off"
button.
^
Open the valves or clean the filters (see
"Cleaning and care").
^
Switch on the machine again and re-select
the program.
The wash cycle finishes too early and the "Fill/Drain" indicator light flashes
(fault code F A appears in the display)
Possible fault Solution
–
The drain hose is kinked.
–
The drain pump is blocked.
^
Turn the program selector to the "Stop"
position (the fault code goes out).
^
Correct the fault.
^
Pump away the water and start the
program again (see additional program
"Drain" and "Turning on").
Frequently Asked Questions
42

Miele G 7856 Specifications

General

Brand	Miele
Model	G 7856
Category	Dishwasher
Language	English