Problem solving guide
106
Fault messages
Problem Possible cause and remedy
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before rectifying the problem, you must:
Switch the dishwasher off.
Fault FXX: Technical
fault. Switch the appliance
off and back on again. Read
the operating instruction
manual for further details.
There may be a technical fault.
Switch the dishwasher back on after a few
seconds.
Restart the desired programme.
If the fault message appears again, there is a
technical fault.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Waterproof fault: Switch
appliance off, turn off the
tap, call Miele Service.
The Waterproof system has reacted.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Fault F78: A technical
fault has occurred. Switch
off the appliance, turn off the
tap and call Miele Service.
Circulation pump fault.
Switch the dishwasher off.
Switch the dishwasher back on.
Restart the desired programme.
If the fault message appears again, there is a
technical fault.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
To Next Page
Loading...
Need help?
General
