Cleaning the spray arms.
On rare occasions particles of food
may get stuck in the spray arm jets.
They can be easily cleaned as follows:
To remove the middle spray arm lo-
cated beneath the upper basket,
gently push upwards until it engages
in the ratchet
b, then unscrew it c.
Lift up on the lower spray arm to
remove it.
Dishwashers with cutlery basket:
Unscrew the upper spray arm.
Dishwashers with cutlery tray:
Pull out the cutlery tray.
Push up on the upper spray arm to
engage the tooth-wheel mechanism
and then unscrew the spray arm.
To clean the spray arms, use a
pointed object to push the the food
particles into the jets.
Rinse under running water to com-
plete the process.
After cleaning, replace the spray
arms.
Important:
After replacing the spray arms,
check that they rotate freely.
Cleaning and care
41
To Next Page
Loading...
Need help?
General
