Options
44
Delay Start
You can set the start time for a pro-
gram. The start time can be delayed be-
tween 30 minutes and 24 hours.
The delay period is shown in 30 min-
utes increments for a delay period be-
tween 30 minutes and 9 hours 30 min-
utes. It is shown in hours for periods
longer than this.
When using the Delay Start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet, pow-
der detergent can become lumpy
and stick to the dispenser, with the
result that it is not fully dispensed.
Do not use liquid detergent when se-
lecting Delay Start, as it can run into
the dishwasher before it is required.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gram, i.e., before you activate the
FlexiTimer with OK. Also activate the
child lock.
Turn the dishwasher on with the
button.
The Start indicator light flashes.
Select the desired program.
Press the button.
The last delay start time used will ap-
pear in the time display. The indica-
tor light will light up.
Set the required delay start time us-
ing the button.
If you keep the button pressed, the
time will increase automatically up to
hours. To get back to .hours,
press the button twice.
Press the Start button.
The Start indicator light will come on.
To Next Page
Loading...
Need help?
General
