Cleaning and care
54
Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected and
cleaned regularly (approx. every 4 - 6
months).
Turn the dishwasher off.
Remove the spray arms as follows:
Take out the cutlery tray (if your dish-
washer is fitted with one).
Push the top spray arm upwards to
engage the inner ratchet. Then un-
screw the spray arm.
Push the middle spray arm upwards
to engage the ratchet. Then un-
screw the spray arm .
Remove the lower basket.
Pull the lower spray arm firmly up-
wards to remove it.
Use a pointed object to push the food
particles that are stuck in the spray
arm jets into the spray arm.
Rinse the spray arms thoroughly un-
der running water.
Replace the spray arms and check
that they rotate freely.
To Next Page
Loading...
Need help?
General
