Options
47
Factory default settings
If you have altered any settings from the
factory default, you can reset them
back to the factory default settings as
follows:
Turn the dishwasher off with the
button, if it is turned on.
Press the Start button and, simulta-
neously, switch the dishwasher on
using the button.
Keep the Start button pressed for at
least four seconds until the Start indi-
cator light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Press the button 19 times.
The indicator light will flash once at a
long interval and then 9 times at short
intervals.
The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.
– : All settings are set to factory de-
fault settings
– : At least one setting has been
changed
To reset the dishwasher to the factory
default settings, press the Start but-
ton.
The setting is now stored in memory.
Turn the dishwasher off with the
button.
To Next Page
Loading...
Need help?
General
