The oven must be installed into
cabinetry before use.
Do not insulate the cabinet. This will
prevent proper ventilation.
If the oven is to be installed under a
counter top, a sealing strip must
replace the stainless steel rail above
the control panel. The sealing strip
offers additional protection from any
liquids that might spill down from the
counter top.
The strip can be purchased from
Miele.
^
Connect the oven to the electrical
supply.
The oven must be supported from
underneath.
^
Place the oven into the cabinet as far
as the oven trim and align.
^
Open the oven door and locate the
two mounting screw holes in the oven
frame. Mark and drill 6 mm pilot
holes. Secure the oven to the
cabinetry by inserting screws through
the frame and into the cabinetry.
Only operate the appliance after it
has been installed into the cabinetry.
Installing the oven
60
To Next Page
Loading...
Need help?
General
