To refit the door
The hinges must not be closed
without the door attached as it will
be extremely difficult to open them
without the leverage of the door.
^
Hold the door securely at both sides
and carefully fit it back onto the hinge
guides.
Make sure that the door goes back
on straight.
^
Open the door fully.
^
Flip both locking clamps back up as
far as they will go into a horizontal
position.
It is essential that the locking clamps
are flipped down when the door is
refitted after cleaning. Otherwise, on
closing the door, the hinges could
work loose from the guide holes and
this could result in damage to the
door.
Cleaning and care
52
To Next Page
Loading...
Need help?
General
