To remove the shelf runners
,
Make sure the oven heating
elements are switched off and cool.
Danger of burning!
^ Pull the runners forwards out of the
holder and remove.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
To remove the back panel
,
Make sure the oven heating
elements are switched off and cool.
Danger of burning!
The back panel can be removed for
cleaning if necessary.
See "Cleaning and care" for information
on cleaning catalytic enamelled panels.
^
Remove the side runners.
^
Loosen the screws in the back panel
and take it out.
,
Danger of injury!
The oven must not be used without
the back panel fitted.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
Cleaning and care
53