Miele H 7164 BP - Remote Control; Activating Mobilestart; Remoteupdate

Settings
39
Miele@home.
The network settings should be reset
whenever an oven is being disposed of
or sold, or if a used oven is being put
into operation. This is the only way to
ensure that all personal data has been
removed and the previous owner will
no longer be able to access the oven.
- Set up
This setting is only visible if no WiFi
connection has been set up yet. You
must set up a new WiFi connection to
be able to use Miele@home.
Remote control
If you have installed the Miele@mobile
app on your mobile device, have
access to the Miele@home system and
have activated the remote control
function (On), you can use the
MobileStart function to retrieve
information on oven cooking
programmes that are in progress or to
end a programme in progress.
Activating MobileStart
 Select the sensor control to
activate MobileStart.
The sensor control lights up. You
can operate your oven remotely with the
Miele@mobile app.
Directly operating the oven via the
touch display takes priority over
operating it via the remote control
function on the app.
You can use MobileStart as long as
the sensor control is lit up.
RemoteUpdate
The RemoteUpdatemenu option is only
displayed and can only be selected if
the requirements for using
Miele@home have been met (see
“Before using for the first time –
Miele@home”).
The RemoteUpdate function is used for
updating the software in your oven. If
an update is available for your oven, it
will automatically download it. Updates
will not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your oven as usual.
However, Miele recommends installing
updates.
Activating/deactivating
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate installation manually.