Start the Pyrolytic cleaning
programme
,
Danger of burning
The oven door gets much hotter
during pyrolytic operation than
during normal use.
Make sure children cannot touch the
oven whilst a Pyrolytic cleaning
programme is running.
^
Select Pyrolytic cleaning ^.
Py i
PY I appears in the display. The
number flashes.
Use V or W to alternate between PY I,
PY 2 and PY 3.
^ Select the level required.
^ Press OK.
The Pyrolytic cleaning programme will
now start.
0 will also appear in the display.
Py i
0
The 0 symbol will flash to indicate that
the door is locking automatically.
Once it is locked the 0 symbol will light
up constantly.
The oven heating and the temperature
indicator light 6 will then come on
automatically, even with the
temperature selector pointing to the ß
position.
If you want to see how the Pyrolytic
cleaning programme is progressing
you need to highlight the duration
symbol T in the display.
^
Press OK.
^
Press W repeatedly until T starts
flashing.
The time remaining for the Pyrolytic
cleaning programme will appear in the
display. You cannot alter the duration.
You can use the minute minder at the
same time as running the cleaning
programme. At the end of the minute
minder time the buzzer will sound and
the l symbol will start flashing. The
time will then continue to increase in the
display.
The acoustic and visual signals will go
out when you press OK.
PY and the number indicating the
selected Pyrolytic cleaning programme
will then reappear in the display.
Cleaning and care
74
To Next Page
Loading...
Need help?
General
