Timer
40
At the end of the timer
– the Timer symbol flashes,
– the time starts counting upwards,
– a buzzer will sound if turned on (see
"Settings - Buzzer tones").
Select "Timer".
The buzzer will turn off and the symbols
in the display will go out.
Resetting the timer
Select "Timer" or the illuminated
sensor next to the timer duration that
is counting down.
The time previously set appears.
Set the new timer duration using the
numeric keypad.
Confirm with OK.
The changed time is saved and will
count down in seconds.
Canceling the timer
Select "Timer" or the illuminated
sensor next to the timer duration that
is counting down.
The time previously set appears.
Select Reset.
The timer has been canceled.
To Next Page
Loading...
Need help?
General
