Interrupting a program
A program is interrupted as soon as the
door is opened.
If the door is closed, the program will
continue from where it was interrupted.
,
Water in the dishwasher may be
hot. There is a danger of being
burned! Only open the door if
absolutely necessary.
Changing a program
If the selected program has not yet
started:
^
Press the "Start/Stop" button (21) for
at least one second.
^
Press the program button (16) of the
desired program.
^
Select "Delay start" or "Top Solo" if
needed (see "Additional features").
^
Press the "Start/Stop" button (21).
The new program will begin.
If a program is already running, or if the
selected delay start period has started
counting down:
^ Press the "Start/Stop" button (21) for
at least one second.
All program indicators will light and the
"Start/Stop" indicator will flash.
^ Press the program button (16) of the
desired program.
^
Select "Delay start" or "Top Solo" if
needed (see "Additional features").
^
Press the "Start/Stop" button (21).
The new program will begin.
Operation
33
To Next Page
Loading...
Need help?
General
