Loading the dishwasher
34
Cutlery
Cutlery tray
See "Loading the dishwasher -
Loading examples" for examples of
how to load crockery and cutlery.
Arrange the cutlery in the tray as
shown.
To make unloading much easier, cutlery
should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
The upper spray arm must not be
blocked by items which are too big
(e.g. cake servers).
If spoon handles do not fit between
the holders, then lay them the other
way round.
To Next Page
Loading...
Need help?
General
