Emptying the water reservoir
,
Do not attempt to empty the
water reservoir unless the roller and
water are both cool.
Always empty the reservoir once you
have finished ironing. This will help
prevent damage to the reservoir from
damage caused by standing exposure
to such elements in the water as
chlorine, calcium, and copper.
^
Unscrew the cap.
^
The funnel can be screwed into place
for easier emptying.
^
Slowly flip open the roller while
simultaneously holding a suitable
receptacle (e.g., a measuring cup)
under the spout.
Let the water drain out.
^ Screw the cap back onto the spout.
^
After use, return the funnel to its
place in the cord receptacle.
Steam setting
16
To Next Page
Loading...
Need help?
General
