Duvet covers
If the duvet cover has buttons at the
open end, iron the buttons first.
Note: Only pass this end through the
rotary iron if the buttons are
heat-resistant.
^ Start the first run by carefully feeding
this end in first on the left side of the
roller, taking care not to damage any
buttons.
^
It is best to iron the cover in two runs
lengthwise.
Pillowcases
^
Lay the pillowcase on the feeder
plate, position under the heater plate
and iron in one step.
^
If the open end has buttons, only
pass it through the rotary iron if the
buttons are heat resistant.
Ironing Tips
24
To Next Page
Loading...
Need help?
General
