Positioning the laundry
^
Arrange the laundry items on the
feed board so that they are straight,
and smooth them out by hand.
^ Then turn the roller by hand until the
edge of the article to be ironed can
be hel by the heater plate.
^ Press down the foot pedal.
Removing the feed board
The feed board can be removed when
shaped garments are being ironed,
e.g. skirts (round).
^ Lift the feed board out of the
right-hand holder, then pull it outward
toward the left of the roller.
Laundry bar
Ironed laundry can be hung over the
swing out bar to avoid creasing.
,
Take care not to press down on
the bar when it is swung out, this
could cause the rotary iron to tip
over.
Ironing
20
To Next Page
Loading...
Need help?
General
