Important:
After unpacking, let the appliance
stand for approx. 2 hours at room
temperature after transporting it to
its final location before connecting it
to the mains.
This is important for the correct
electronic functioning of the appliance.
^
Remove all the packaging materials
and any protective foil from the
appliance.
Do not remove the cover to the
microwave outlet inside the oven,
nor the film covering the inside of
the door.
^
Check the appliance for any
damage.
Do not use the microwave if
– the door is warped.
– the door hinges are loose.
– holes or cracks are visible in the
casing, the door or the oven interior
walls.
Operating the appliance with this
type of damage will result in
microwave leakage and present a
hazard to the user.
^
Clean the inside of the oven and all
the accessories with warm water
applied with a well wrung-out soft
sponge or cloth.
^
Stick the enclosed short instructions
to the frame behind the door as
illustrated, making sure they do not
block any of the vents.
Before using for the first time
19
To Next Page
Loading...
Need help?
General
