When building in the appliance,
ensure that the vents at the front of
the appliance are not hindered.
Make sure that there is a gap of at
least 2.5 mm between the sides of
the appliance and adjoining furniture
doors and at least 4 mm above the
appliance.
The appliance is designed to be built
into a tall unit and is also suitable for
underbench installation.
The installation of the microwave oven
below a cooktop or above a plate
warming drawer is not permitted.
Building-in dimensions
Underbench
To transport the appliance, make
sure that you lift it by the appliance
housing and not by the frame. The
frame is not sturdy enough to bear
the weight of the appliance when it
is being carried.
Installation
46
To Next Page
Loading...
Need help?
General
