Uninterrupted transmission is only
possible with the door shut.
If the oven door is opened during the
cooking programme, e.g. to baste the
meat, then the radio signal is
interrupted. It will resume once the door
has been closed. It will take a few
seconds for the current core
temperature to show up in the display
again.
If the food probe is not being used,
it must not be left in the oven during
a cooking programme. The
temperature sensor will be
destroyed at temperatures over
100 °C. For this reason, the food
probe should be replaced in its
holder in the door when it is not
being used.
It will not be damaged when it is
inserted into the food, as it is only
possible to select core temperatures
up to 99 °C.
When to use it
Apart from Automatic programmes,
Special applications and User
programmes, the food probe can be
used with the following functions:
–
Auto roast [
–
Fan plus U
–
Intensive bake O
–
Conventional heat V
–
Moisture plus d
–
Fan grill \
Roasting
87
To Next Page
Loading...
Need help?
General
