Use
20
Changing the
value of a spin
speed selection
button
Press the spin speed selection button you want to change the value
for.
The bar will light up underneath the selected button and the current
spin speed value will appear in the display.
Press the or –button to set the roller speed you want to save for
that button.
Press and hold the spin speed selection button until it flashes once.
The new roller speed is now saved for that button.
Laundry feed
Press the button to start the ironing process.
The heater plate engages and the roller begins to rotate.
Laundry with buttons must be inserted into the ironer so that
the buttons are facing the roller and can be pressed into the roller's
ironing cloth during ironing.
Otherwise, there is a risk of them being damaged or torn off when
they meet the heater plate.
Place a cloth between zips, metal buttons, and metal hooks to pro-
tect the heater plate before ironing.
Never iron metal or plastic clasps of any kind, or extremely raised
buttons (e.g. ball-shaped buttons).
Now lay the item of laundry parallel to the roller at the beginning of
the laundry infeed table.
Smooth the item of laundry.
Feed the item of laundry evenly into the ironer.
Do not feed small items of laundry into the ironer on only one side.
If laundry is fed in on just one side, the heat will only be reduced on
one side and the load only exerted on the roller padding on one
side. If the laundry continues to be fed in on one side only, this will
be signaled by an an audible signal and the red symbol or
symbol appearing in the display.
Use the entire roller width wherever possible and distribute small
items of laundry evenly on the laundry infeed table.
To Next Page
Loading...
Need help?
General
