The timer can be used to select when you want the programme
to end (if this option has been activated by a Miele service
technician). The programme start can be delayed to start
automatically in 30 minute intervals up to a maximum of 24 hours.
To open the Timer sub-menu
Cottons Normal+
Low temp.
Duration: 1:47 h
Low temp. B Timer Y Save Back A
HHHH
^
Press short cut button E Timer.
To select a delay start time
Cottons Normal+
Low temp.
10:00
Start:
10:13
Finish:
12:00
^ Use the multi-function selector to select the programme
end time and confirm your selection.
The programme end time will be adjusted to the next full or
half hour. Once the end time has been entered, the start
time of the programme will also appear.
To start the timer
^
Press the Start button. The timer will count down in minutes
until the start of the programme. If the time until the
programme start is more than one hour, the drum will turn
briefly every hour to prevent creasing.
To cancel the timer
^
Press short cut button G once to cancel the timer. Press
it again to come out of this menu.
Timer
22
To Next Page
Loading...
