Contrast
Brightness
There are ten different display
contrast and display brightness
settings.
The bar chart shows you the setting.
Standby
To save energy, the display goes out
after 10 minutes and the indicator
light for the Start button flashes
slowly.
On
Standby comes on:
– if a programme is not selected.
– after the Start button has been
pressed.
– after the end of a programme.
Not in current Prog.
(the machine is delivered with this
option selected)
Standby comes on:
–
if a programme is not selected.
Operating the multi-function selector or
one of the short cut buttons switches
the display back on again.
off
The display remains on all the time.
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The bar chart shows you the level that
has been set.
The machine is delivered with 0 mins
(normal cooling down period)
–
The programme duration will
increase accordingly.
You cannot extend the cooling down
time for the Warm air, Cool air,
Woollens handcare or Smoothing
programmes.
Settings menu J
53
To Next Page
Loading...
Need help?
General
