Miele SO Series User Manual

Error messages
40
 Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Error messages are displayed with a quick flashing light on the battery charging
state indicator on the PowerUnit.
Problem Cause and remedy
Top indicator is flashing
quickly
“Comforthandle not recognised” error
 Remove the Comforthandle and reconnect it (see
“Installation and connection – Connecting the
Comforthandle”).
 Remove the battery, wait for 10seconds and rein-
sert it.
Middle indicator is
flashing quickly
“Motor overheating” error
 Empty and clean the dust container, pre-filter and
fine dust filter (see “Maintenance”).
 Remove the battery, wait for 10seconds and rein-
sert it.
 Wait for approximately 30minutes before switch-
ing the vacuum cleaner back on again.
Middle and top indicat-
ors are flashing quickly
“Jammed roller brush” error
 Insert the grey CarpetCarerollerbrush instead of
the red roller brush fitted as standard (see “Using
the accessories supplied – Carpet Care roller
brush”).
 Select a lower power level (see “Use – Selecting
the suction power level”).
Bottom and top indicat-
ors are flashing quickly
Internal system error
 Remove the battery, wait for 10seconds, reinsert
it and charge it.
Bottom and middle in-
dicators are flashing
quickly
“Battery overheating” or “Battery not recognised” er-
ror
 Wait for approximately 30minutes before switch-
ing the vacuum cleaner back on again.
 Insert an original Miele AP01/AP02/AP03 lithium-
ion rechargeable battery (HX LA).

Miele SO Series Specifications

General

Brand	Miele
Model	SO Series
Category	Vacuum Cleaner
Language	English