Changing the programme sequence
19
Once a programme has started
- changing a programme once it has
started
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If you try to change a programme,
flashes until the original programme is
reset.
You will need to cancel the current
programme before you can select a
new one.
Cancelling a programme
Turn the programme selector to Stop.
The items will be cooled down,
depending on the temperature reached
and how long they have been dried for.
The programme is not finished until
lights up.
Switch the dryer off and then on
again.
Select and start a new programme
immediately.
Adding or removing laundry
after a programme has started
Restart the programme
immediately after adding or
removing items.
Otherwise remove all items and
spread them out to cool down
completely.
Press the Door button.
Add or remove items.
Close the door.
Press the Start button.
Programme duration
Altering the programme sequence can
cause adjustments in the h min time
remaining display.
To Next Page
Loading...
Need help?
General