Settings
45
Altering the residual moisture
level in the Cottons
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible. However, if you require the
laundry to be drier or damper, you can
reduce or increase the default residual
moisture in this programme.
Exception: Normal remains unchanged.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press Start and keep it pressed in
whilst carrying out steps -.
Switch the dryer on.
Wait until the indicator light for the
Start button comes on . . .
. . . and then release the Start
button.
The Empty container indicator light will
flash once.
The option selected will be displayed
by a number which will alternate with
.
Laundry will be damper
The standard drying level will
remain on the Normal setting
(factory default setting)
(The Clean out airways indicator light
will also flash once)
Laundry will be drier
(The Clean out airways indicator light
will also flash twice)
Pressing the Start button switches
between the options.
Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking.
To Next Page
Loading...
Need help?
General