Fine filter
Cleaning intervals
Only clean the fine filter if the Clean
the filters indicator light comes on.
To switch off the Clean the filters
indicator light:
^
Remove, clean and refit the fine filter
while the dryer is switched on.
Removing the fine filter
At the bottom left of the appliance:
^
Press the cover panel for the fine
filter.
The panel will open.
^
Pull the fine filter out by the handle.
^ Pull the handle out of the fine filter.
Cleaning the fine filter
^
Clean the fine filter thoroughly under
running water.
^
Then squeeze the fine filter
thoroughly.
,
The fine filter must not be
replaced in the dryer dripping wet.
This could cause a fault to occur.
^
Remove any fluff on the handle with a
damp cloth.
Cleaning and care
30