Miele TCA220WP User Manual

Operating the tumble dryer
19
f
sensor control (Start/Add laun-
dry)
 The programme can be started
as soon as Start/Add laundry is
flashing on and off. Touching
the sensor control starts
the selected programme. Start/
Add laundry will light up con-
stantly on the display.
 Once the programme has been
started, the sensor control
allows you to add laundry.
g
Time display
After the programme has started, the
programme running time will appear
on the display in hours and minutes.
– When Delay start is being used,
the programme running time will
appear after the Delay start period
has elapsed.
– With most programmes, the run-
ning time displayed may vary or
“jump”. The following factors,
among others, affect the pro-
gramme running time displayed:
the quantity of laundry, the type of
fabric and the residual moisture in
the laundry. The electronic module
adapts to these factors with in-
creasing accuracy.
h
Optical interface
This is used by the Customer Ser-
vice Department as a transmission
point.
i
Programme selector
For selecting programmes and for
switching off the appliance. The
tumble dryer is switched on by se-
lecting a programme and switched
off by turning the programme se-
lector to theposition.
How the sensor controls work
The sensor controls select/adjust the
values located above them.
The , ,  and sensor controls re-
act to fingertip contact.

Miele TCA220WP Specifications

General

Brand	Miele
Model	TCA220WP
Category	Dryer
Language	English