EasyManuals Logo
Home>Miele>Dryer>TSB 143 WP

Miele TSB 143 WP User Manual

Miele TSB 143 WP
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Problem solving guide
51
Other problems
Problem Cause and remedy
There are humming
noises
The compressor is operating.
These noises are quite normal and do not indicate a
fault.
A programme does not
start
No obvious cause.
Connect the tumble dryer to the mains
Turn on the tumble dryer
Close the door
Check whether the mains fuse has tripped
Has there been a power cut? When power is restored
any previously running programme will restart auto-
matically.
Only the Start/Add
laundrysensor control
flashes slowly when the
programme is running.
Once the programme has been running for
10minutes, the indicators go out. The Start/Add laun-
dry sensor control flashes slowly. This is not a fault,
but a normal function to help save energy.
Touch a sensor control to switch on the indicators.
See “Control field standby status” in “Program-
mable functions”.
The tumble dryer is
switched off.
The tumble dryer switches off automatically after
15minutes if no further selections are made. This is
not a fault, but a normal function.
Select a programme.
The interior drum light-
ing does not come on
The drum lighting will switch off automatically ...
... when the door is closed.
... after a few minutes when the door is open (to save
energy).
If the dryer is switched on, the drum lighting will
come on when the door is opened.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele TSB 143 WP and is the answer not in the manual?

Miele TSB 143 WP Specifications

General IconGeneral
Drum typeHoneycomb
Door colorWhite
Door hingeLeft
Door styleOpaque door
Cord length2 m
Drum volume120 L
Control typeRotary, Touch
Loading typeFront-load
Drying systemHeat pump
Built-in displayYes
Appliance placementFreestanding
Inverter technologyNo
Delay start (max)24 h
Cycle time155 min
Noise level66 dB
Drying classA
Drum capacity7 kg
Refrigerating mediumR290
Number of drying programs11
Current13 A
Heat sourceElectric
Connected load1100 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy consumption1.7 kWh
Energy efficiency scaleA+++ to D
Power consumption (off)0.3 W
Annual energy consumption208 kWh
Weight and Dimensions IconWeight and Dimensions
Depth643 mm
Width596 mm
Height850 mm
Weight58000 g
Depth with door open1077 mm

Related product manuals