Interrupting a programme
^
Switch the washing machine off with
the
I-On/0-Off
button.
To continue with the same programme:
^
Switch the washing machine back on
again with the
I-On/0-Off
button.
Altering a programme once
selected
The machine will accept the following
changes after a programme has
started:
– at any time
after the start, the spin
speed can be changed within the
limits for the programme.
– up to 6 minutes after the start of a
programme it is possible to change
the temperature selected for that
programme.
After the start of a programme it is no
longer possible to select a different
programme.
If the programme selector is moved, the
indicator light
Anti-crease/Finish
will
start flashing. However, the programme
sequence remains unaffected. The
indicator light will go out again when
the programme selector is moved back
to the programme previously chosen.
Skipping a programme stage
^
Turn the programme selector to
Finish
.
As soon as the programme sequence
indicator light for the programme stage
you want the programme to continue at
starts flashing:
^
Turn the programme selector back
again to the appropriate programme
within 4 seconds
.
To cancel or select a different
programme
^ Switch the washing machine off with
the
I-On/0-Off
button.
^ Turn the programme selector to
Finish
.
The programme has now been
cancelled.
^ Switch the washing machine back on
with the
I-On/0-Off
button.
^
Select a different programme.
^
Press the
Start
button.
How to wash correctly
25
To Next Page
Loading...
Need help?
General
