The Miele water protection
system
The Miele Waterproof system protects
all parts of the washing machine from
water damage.
The system consists of three main
components:
1) the inlet hoses
2) the electronic unit and the washing
machine housing
3) the drain hose
1) Inlet hoses
– The inlet hoses can withstand
pressure of more than 7000 kPa.
2) Electronic unit and washing
machine housing
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the safety valves,
preventing any more water flowing
into the machine and water in the
suds container is pumped away.
–
Overflow protection
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
3) Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being
emptied completely.
Installation and connection
49
To Next Page
Loading...
Need help?
General
