EasyManuals Logo

Miele WT 2798 i WPM User Manual

Miele WT 2798 i WPM
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
The fluff which occurs during drying
can collect in the drum and also in the
suds container. Run the Rinse out fluff
programme before the machine is used
again so that fluff cannot be deposited
on the next load (e.g. fluff from dark
garments being deposited on lighter
coloured items) or cause a blockage.
The Rinse out fluff programme must
not
be used for rinsing laundry.
Make sure that there are no items of
laundry in the drum before starting
this programme.
^ Switch the machine on.
^ Turn the programme selector to the
Rinse out fluff programme.
If there is a lot of fluff in the machine
select the Water plus extra option.
^ Press the Start/Stop button.
The fluff will be rinsed out after a few
minutes.
^
Remove any fluff remaining from
around the door seal and porthole
glass.
^
Switch the machine off.
The load sensor will have to be
recalibrated after running the Rinse out
fluff programme. See "Before using for
the first time".
Rinse out fluff programme
49

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele WT 2798 i WPM and is the answer not in the manual?

Miele WT 2798 i WPM Specifications

General IconGeneral
BrandMiele
ModelWT 2798 i WPM
CategoryWasher/Dryer
LanguageEnglish

Related product manuals