Drying levels
The drying levels in the Cottons and
Minimum iron programmes can be
altered.
Select the required setting and then
determine whether laundry should be
damper or drier after drying.
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The cooling down phase can be
lengthened from 0 min to 18 minutes.
^ Set the duration with the X and Y
buttons and confirm your setting by
pressing the OK button.
The programme duration will increase
accordingly.
Anti-crease
Anti-crease helps prevent creasing
if laundry is not normally removed
immediately after the end of a
programme.
When the washing function is selected
the drum will turn at intervals for up to
30 minutes after the programme has
finished.
When the drying function or the
washing and drying function is
selected, the drum will turn at intervals
for up to 120 minutes after the
programme has finished.
The door can be opened and laundry
removed at any time during the
anti-crease phase.
On:
Anti-crease is activated (default
setting).
Off:
Anti-crease is deactivated.
Settings menu
86
To Next Page
Loading...
Need help?
General
