Umbau- und Montageanweisung
M.-Nr. 09469886 35 von 86
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten. 28.09.2018
WTS 510 stand with drawer for washing machines and tumble dryers
Parts required
Quantity Mat. no. Designation
1 09322300 WTS 510 install kit
Parts included
Quantity Mat. no. Designation
1 Installation instructions
1 WTS 510 stand
1 Stand rear panel
2 Connection piece
4 Spacer sleeve
3 Raised-head screw, CEM 4x10
4 Set screw, M10 x 40 mm
10 Adhesive strips for rear panel
1 06593051 Floor fastening kit
Special tool
Quantity Mat. no. Designation
Level
18mm open wrench, or pipe wrench for threaded bolts (square) and dryer feet
T20 screwdriver for rear panel
5 mm Allen key (for dryer only)
T30 screwdriver for screws on the eccentric cams (for dryer only)
Risk of injury during installation
DANGER
Risk of electric shock. Danger due to live parts.
A Before starting any service work, the machine must be disconnected from power.
DANGER
Risk of accident
A Installation can only be carried out with the washer or dryer not installed. For uninstallation, see the appropriate
operating instructions.
A Ensure that children or pets cannot access the work area while installation work is being carried out.
A Do not stand, or allow anyone to stand, on the drawer.
DANGER
Risk of crushing
A Wear slip-proof working gloves and safety shoes.
A When carrying out work, ensure that body parts, especially hands and feet, are not positioned under or between
machines.
To Next Page
Loading...
Need help?
General
