DC input type PoE-in (12-57)
Power adapter nominal voltage 24 V
Power adapter nominal current 0.8 A
Max power consumption without attachments 8 W
Max power consumption 8 W
Mounting
1. Slide the included metallic mounting rings into the two slots on the back of the antenna dish.
2. Attach the unit to a pole, with the Ethernet port pointing downward.
3. Use a PH2 screwdriver to tighten the rings.
4. Fix the Ethernet cable to the pole using zip ties, less than one meter from the unit, to avoid the cable
being pulled out of the port.
5. Check mounting angle and positioning.
When mounting outdoors, please ensure that any cable openings are directed downwards. Use a POE
injector and proper grounding, this device has a specially-designed grounding connector under the port
cover. Recommended using shielded Cat5/6 cable. The IP rating scale for this device is IP54.
Configuration
Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as
updating your RouterOS software to the latest version ensures the best performance and stability. For
wireless models, please make sure you have selected the country where the device will be used, to
conform to local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We
suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case an IP
connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC
address of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see the section Reset button.
Accessories
The package includes the following accessories that come with the device:
To Next Page
Loading...
Need help?
General
