Make sure your ISP will accept hardware change and will issue an IP address.
Connect your WAN cable to port 1, and LAN computers to the rest ports.
Connect the device to the included adapter.
Set LAN computer IP configuration to automatic (DHCP).
In case the IP is not available, use the (WinBox) configuration tool to connect through MAC address.
Open https://192.168.88.1 in your web browser to start configuration, there is no password by default,
you will be logged in automatically.
Click the (Check_for_updates) button and update your RouterOS software to the latest version. The
device needs to have an active Internet connection.
For CRS and CCR manually update the device, go to our download
page https://mikrotik.com/download
Choose your architecture based on your device model under the menu (System/Resources) and
download the latest packages from a stable channel to your PC.
Open (WebFig) or (WinBox) and upload packages in the (Files) menu.
Reboot the device.
Set up your password to secure the device.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or
hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power plug from the power outlet.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
