EN - English -Quick Guide:
This Quick Guide covers models: RBD52G-5HacD2HnD-TC (hAP ac²), RBcAPGi-5acD2nD (cAP ac), RB952Ui-5ac2nD-TC (hAP ac lite TC), RB952Ui-5ac2nD
(hAP ac lite).
This is a wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on for the full up to date user manual. Or scan the QR code with your mobile phone.https://mt.lv/um
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found athttps://mt.lv/help
If you need help with configuration, please seek a consultanthttps://mikrotik.com/consultants
First steps:
Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address;
Connect the service provider cable to the Internet port and connect the device to the power source;
Open network connections on your computer and search for MikroTik wireless network - connect to it;
The configuration can be done through the wireless network using a web browser or mobile app. Alternatively, you can use a WinBox configuration toolhttps://
;mt.lv/winbox
Open in your web browser to start configuration, user name: a and there is no password by defaulthttp://192.168.88.1
dmin
(or, for some models, check user
and wireless passwords on the sticker);
Click the "Check for updates" button and update RouterOS to the latest version;
For a manual update of the device, visit the products page at to find your product. The required packages are accessible under https://mikrotik.com/products
the menu;
"Support&Downloads"
Upload downloaded packages to the menu and reboot the device;
WebFigor
Winbox
"Files"
By upgrading your RouterOS software to the latest version, you can ensure optimal performance, stability, and security updates;
In the menu set up the following: Choose your country, to apply country regulation settings;
"QuickSet"
Set up your wireless network password in the left field;
Set up your router password in the bottom field.
This device needs to be upgraded to RouterOS v7.10 or the latest stable version, to ensure compliance with local authority regulations!
It is the end users responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions.
To Next Page
Need help?
General
