To Next Page

To Previous Page

PoE-Out 802.3af/at the Same voltage as supplied via 2-pin terminal - Passive PoE or

802.3af/at Compatible (if 44–57V PSU used)

PoE-Out ports Ether1 - Ether8, max out per port output (input < 30 V): 620 mA, max out per port output (input > 30 V): 420 mA

Smart PoE Controller

Max total out 2.59 A

Total output power 130 W

Total output current 2.28 A

Number of DC inputs 2

Supported input voltage 24-57 V (PoE in) 24-57 (2-pin terminal)

Max power consumption (without attachments) 15 W

Max power consumption 150 W

Configuration

Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version

ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to

conform to local regulations.

RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to

the possibilities: . In case an IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC https://mt.lv/help https://mt.lv/winbox

address of the device from the LAN side (all access is blocked from the Internet port by default).

For recovery purposes, it is possible to boot the device for reinstallation, see section .Buttons and jumpers

Mounting

We recommend Cat6 cables for our devices.

The mounting and configuration of this device should be done by a qualified person, to comply class please observe the strict procedures for IP66

mounting instructions.

Extension slots and ports

4RB5009UPr+S+OUT

Product code RB5009UPr+S+OUT

CPU Quad-Core 88F7040 1.4 GHz

CPU architecture ARM 64bit

Size of RAM 1 GB