MikroTik RBFTC11 User Manual

2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
1.
2.
3.
4.
Insert dowels if needed, depends on wall structure and material.
Place included a steel bracket on the wall.
Use screws to secure it in the place.
Extend your Ethernet cable through the opening and connect to the Ethernet port.
Mount the device on the steel bracket
Secure it in place with the screw.
Close bottom latch.
Avoid mounting the device on the low ground spot, as you won't be able to attach and close the bottom latch.
Mounting on the ceiling:
A Special bracket is included in the package to mount on the drop ceiling. As it consists of two parts, to be attached on both sides of the ceiling tile.
Use the template to mark spots for holes.
Place both mounting brackets on the spot.
Secure them together using screws.
Continue assembling in the same manner if mounting on the wall.
Extend your Ethernet cable through the opening and connect to the Ethernet port.
Mount the device on the steel bracket.
Secure it in place with the screw.
Close bottom latch.
Bottom Lid
The bottom lid is secured in place with the captive screw.
Use the Philips PH2 screwdriver to unscrew it, but do not remove the screw completely.

MikroTik RBFTC11 Specifications

General

Brand	MikroTik
Model	RBFTC11
Category	Network Router
Language	English