MikroTik RBFTC11 User Manual

1.
2.
3.
Pull the cover in the opposite direction from the device to remove it.
Reassemble.
Powering
The device accepts power from the power jack or from the Ethernet port:
Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 12-57 V DC;
Ethernet port accepts 802.3af/at PoE.
The power consumption under maximum load can reach 3 W.
Connecting to a PoE Adapter:
Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter;
Connect an Ethernet cable from your local network (LAN) to the PoE adapter;
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Expansion slots and ports
One 10/100/1000 Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be
used for connecting to other network devices.
One 1G SFP port.

MikroTik RBFTC11 Specifications

General

Brand	MikroTik
Model	RBFTC11
Category	Network Router
Language	English