Configuration
The RBFTC11 is set up as a switch, with 192.168.88.1 as the management IP of the master interface.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best performance and
stability. RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself
accustomed to the possibilities:https://mt.lv/help.
In case IP connection is not available, the Winbox tool (https://mt.lv/winbox ) can be used to connect to the MAC address of the device from the LAN side
(all access is blocked from the internet port by default). For recovery purposes, it is possible to boot the device from the network, see section Buttons and
jumpers.
Buttons and jumpers
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Operating system support
This device runs SwOS, which is the only supported OS for this device.
To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as in
designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated
disposal sites in your area.
Note. The information contained here is subject to change. Please visit the product page on
www.mikrotik.com for the most up to date version of
this document.
To Previous Page
Loading...
Need help?
General
