Extension slots and ports
• One Ethernet (10/100 Mbit or Gigabit, depends on model), supporting automatic cross/straight cable
correction (Auto MDI/X), so you can use either straight or cross-over cables for connecting to other network
devices.
• One Integrated Wireless with built-in 23-degree directional antenna, max gain 16 dBi.
Reset button
RouterBOOT reset button has the following functions. Press the button and apply the power, then:
• Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.
• Release the button when the LED turns solid green to clear all configuration and defaults.
• Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall
servers (required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Accessories
Package includes following accessories that comes with the device:
• DC ⎓ EU/US Switching Power Supply 24 V;
• Hose Clamp SUS304 (Philips type ; clamping diameter range 35-70 mm);
• POE Injector with shielded connector;
• Spole mounting bracket;
Specifications
For more information about this product, specification and pictures please visit our web page:
https://mikrotik.com/product/RBSXTG-6HPnD
Safety Notice
Electric shock hazard. This equipment is to be serviced by trained personnel only.
Operating system support
The device supports RouterOS software v6 version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
See mikrotik.com/products for the latest version of this document. Page 3, Document # 49031 Modified on: 06.NOV.2019
To Next Page
Loading...
Need help?
General
