To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Milnor MWF27J8 and is the answer not in the manual?
Vital safety information for management personnel regarding operation and maintenance.
Warnings and instructions regarding electrical and mechanical hazards inside the machine.
Instructions about hazards around the front, sides, rear, or top of the machine.
Hazards related to the cylinder and the laundering process.
Hazards resulting from inoperative safety devices or damaged mechanical devices.
Hazards related to careless operator actions and servicing.
Requirements for floors and foundations for rigid washer-extractors.
Requirements for floors and foundations for flexibly-mounted machines.
Ensuring floors and supporting structures have sufficient strength and rigidity.
Examples of dangerous chemicals and configurations that can cause damage.
Using chemical manifolds and proper procedures to prevent damage.
Procedures for handling machines and reporting shipping damage.
Guidelines for safely moving and positioning the machine.
Requirements for installation site, including openings and clearances.
Ensuring ventilation and easy access to controls.
Ensuring floor strength and rigidity for machine operation.
Steps for setting the machine, including anchor bolts and grout.
Final checks before operating the machine, including removing shipping restraints.
Overview of required service connections for the machine.
Specifications and requirements for connecting water and steam lines.
Safety and procedural guidelines for electrical connections.
Explanation of the door interlock system operation and safety warnings.
Periodic inspection and adjustment of the door locking assembly.
Standard torque requirements for frequently used fasteners.
Torque values for carbon steel fasteners without threadlocker.
Recommendations for threadlocker application and torque values.
Torque values for stainless steel fasteners.
Illustration and parts list for the drive system components.
Details and parts for the bearing housing assembly.
Procedures and components for installing the bearing assembly.
Details and parts list for the marshmallow suspension system.
Identification and parts list for the shock absorbers.
Procedures and diagrams for assembling and installing the machine door.
Components and settings for the door lock mechanism.
Details on the door handle, lock actuator, and shim adjustments.
Schematic and components for water and steam connections.
Illustration and parts list for the machine's drain system.
Illustration and parts list for the soap chute.
Cross-section and parts list for the peristaltic chemical supply.
Diagrams and parts list for the 5 compartment chemical supply system.
General