5 - 1
5 Data Management
5.1 Data Management Overview
The following table lists data stored in the equipment and how to manage these data.
• The equipment is capable of 1 Gbit internal data storage.
5.2 Generating a Patient File
Once turned on, the equipment automatically generates a patient ID and starts to record clinical data for this ID.
If turned off, the equipment automatically discharges the patient, and the patient becomes a discharged patient.
• Earlier stored data will be overwritten by later ones if the equipment capacity is reached.
5.3 Managing Configurations
If you purchase the AED Tool software, you can:
■ Viewing equipment Information
■ Viewing configurations
■ Changing configurations
■ Restoring to the factory default configurations
For more information on specific operations, see AED Tool Instructions for Use.
Data Type Description Management Method
Patient Data ECG data Heart rhythm Contact your local distributor.
Events AED analysis, CPR operation,
system operations and prompts
Recordings Audio recorded during a rescue
Rescue data Total rescue time, CPR duration,
total shocks
CPR data Compression rate and depth
provided by using the CPR sensor.
Configurations Configurable setup options AED Tool software
Equipment information Equipment model, serial number,
software version, total runtime,
battery information, electrode
pads information, total auto tests
Equipment status Powered on, powered off, out of
location
AED ALERT Device Management
system
Auto test data Last selftest report, fault codes if
auto test fails
To Next Page
Loading...
Need help?
General
