To Next Page

To Previous Page

2 - 1

2 Equipment Introduction

2.1 Overview

The BeneHeart C & S series automatic external defibrillator is designed for treating life-threatening heart beat

irregularities.

There are two types of product models provided: semi-automatic and fully automatic. Some of the series

equipments are configured with the screen. Characteristics of the product models are detailed in the following

table.

After the electrode pads are applied to the patient’s chest, the equipment analyzes the patient’s heart rhythm.

■ If a shockable rhythm is detected, the semi-automatic model requires the operator to deliver the shock, the

fully automatic model delivers the shock without any intervention.

■ If non-shockable rhythm is detected, the equipment enters CPR status by default.

Both types of models provide voice instructions that guide you through the entire defibrillation process. A

flashing Shock button on the semi-automatic model is also presented to reinforce the voice prompts

The equipment also provides real-time CPR feedback, including the chest compression depth, rate and

interruption time if it is connected with a CPR sensor.

Model Defibrillation mode With the Shock

button?

With the Screen?

BeneHeart

C series

BeneHeart C1 semi automatic Yes No

BeneHeart C1A

BeneHeart C2 Yes

BeneHeart C2A

BeneHeart C1 Fully Automatic fully automatic No No

BeneHeart C1A Fully Automatic

BeneHeart C2 Fully Automatic Yes

BeneHeart C2A Fully Automatic

BeneHeart

S series

BeneHeart S1 semi automatic Yes No

BeneHeart S1A

BeneHeart S2 Yes

BeneHeart S2A

BeneHeart S1 Fully Automatic fully automatic No No

BeneHeart S1A Fully Automatic

BeneHeart S2 Fully Automatic Yes

BeneHeart S2A Fully Automatic

Mindray BeneHeart S1 Fully Automatic User Manual

Questions and Answers: