A - 1
A Specifications
A.1 Safety Specifications
The equipment is classified, according to IEC 60601-1:
A.2 Environmental Specifications
Type of protection against
electrical shock
Equipment energized from an internal electrical power source (battery).
Degree of protection against
electric shock
Type BF defibrillation proof for external defibrillation.
Mode of operation Continuous
Degree of protection against
harmful ingress of solid
IP5X
Degree of protection against
harmful ingress of water
IPX5
Degree of mobility Portable
Item Temperature Relative humidity Barometric
Operating
conditions
-5ºC to 50ºC
(at least 60 minutes of working time
when the temperature reduces from
room temperature to -20ºC)
5% to 95%,
non-condensing
57.0 to 106.2 kPa
(-381m to 4575m)
Short-Term Storage
conditions
-30ºC to 70ºC 5% to 95%,
non-condensing
57.0 to 106.2 kPa
(-381m to 4575m)
Long-Term Storage
conditions
15ºC to 35ºC
Shock
Complies with requirements of 21.102, ISO9919:
Peak acceleration: 1000m/s
2
(102g)
Duration: 6ms
Pulse shape: half-sine
Number of shocks: 3 shocks per direction per axis (18 total)
Vibration
Complies with requirements of 21.102, ISO9919.
Bump
Complies with the requirements of 6.3.4.2, EN1789.
Peak acceleration: 15g
Duration: 6ms
Number of impacts: 1000
Impact direction: vertical impacts are applied when the equipment under test is placed at normal operating
position.
To Next Page
Loading...
Need help?
General
